This shows you the differences between two versions of the page.
tables [2014/02/15 03:17] jktuning |
tables [2019/02/13 14:27] (current) |
||
---|---|---|---|
Line 1: | Line 1: | ||
===== Editing Tables ===== | ===== Editing Tables ===== | ||
- | All of the tables in NismoTronic have the ability to use the [[tables#additive change|additive change]], percent change and set value change functions. | + | All of the tables in NismoTronic have the ability to use the [[tables#additive change|additive change]], [[tables#percent change|percent change]] and [[tables#set value|set value change]] functions. |
- | === additive change === | + | ==== Additive Change ==== |
+ | *Ctrl+Up Arrow or (+) key = (+1 unit) | ||
+ | *Ctrl+Down Arrow or (-) key = (-1 unit) | ||
+ | *Ctrl+J -> Additive Change = (+/- 1-255 units) | ||
+ | |||
+ | ==== Percent Change ==== | ||
+ | *Ctrl+J -> Percent Change | ||
+ | *//newTableValue = (currentTableValue * (1 + (x/100)))// | ||
+ | |||
+ | ==== Set Value Change ==== | ||
+ | *Ctrl+J -> Set Value | ||
+ | *Type in the value you would like to enter in the cell and hit enter to submit the change. | ||
+ | |||
+ | |||
+ | ===== Primary Tables ===== | ||
+ | |||
+ | The primary fuel and ignition tables also have a few extra functions for importing and copying maps between one another and from external TCDs. | ||
+ | |||
+ | ==== IMPORT FROM TCD ==== | ||
+ | *Right Click -> IMPORT FROM TCD -> Select the TCD file you want to import the table from. | ||
+ | * This will import the entire map, including RPM and Load scales into your current table. | ||
+ | |||
+ | ==== COPY MAP FROM ==== | ||
+ | *Right Click -> COPY MAP FROM -> Select the table you want to copy from. | ||
+ | * This will copy the entire map, including RPM and Load scales into your current table. | ||
+ | |||
+ | ==== COPY RPM SCALES FROM ==== | ||
+ | *Right Click -> COPY RPM SCALES FROM -> Select the table you want to copy the RPM scale from. | ||
+ | * This will only copy the RPM scale into your current table. | ||
+ | |||
+ | ==== COPY LOAD SCALES FROM ==== | ||
+ | *Right Click -> COPY LOAD SCALES FROM -> Select the table you want to copy the load scale from. | ||
+ | * This will only copy the Load scale into your current table. | ||