NismoTronic Wiki

All of the tables in NismoTronic have the ability to use the additive change, percent change and set value change functions.

• Ctrl+Up Arrow or (+) key = (+1 unit)
• Ctrl+Down Arrow or (-) key = (-1 unit)
• Ctrl+J → Additive Change = (+/- 1-255 units)

• Ctrl+J → Percent Change
  • newTableValue = (currentTableValue * (1 + (x/100)))

• Ctrl+J → Set Value
• Type in the value you would like to enter in the cell and hit enter to submit the change.

The primary fuel and ignition tables also have a few extra functions for importing and copying maps between one another and from external TCDs.

• Right Click → IMPORT FROM TCD → Select the TCD file you want to import the table from.
  • This will import the entire map, including RPM and Load scales into your current table.

• Right Click → COPY MAP FROM → Select the table you want to copy from.
  • This will copy the entire map, including RPM and Load scales into your current table.

• Right Click → COPY RPM SCALES FROM → Select the table you want to copy the RPM scale from.
  • This will only copy the RPM scale into your current table.

• Right Click → COPY LOAD SCALES FROM → Select the table you want to copy the load scale from.
  • This will only copy the Load scale into your current table.