Sidebar
createtcd
This is an old revision of the document!
Open/Save/Import TCD
To open a TCD go to File → Open and choose the TCD you would like to open.
To Save the TCD you have open, simply go to File → Save.
To Save the TCD to a new file, go to File → Save As.
To Import the tune data from the NEMU into a TCD file.
- Open a TCD from the startup calibration folder that matches your ECU type.
- Connect to the NEMU and when prompted that the calibration does not match, simply select IMPORT FROM NEMU.
- Go to File → Save As and save the downloaded content to a new file
createtcd.1392433400.txt.gz · Last modified: 2019/02/13 14:26 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution 3.0 Unported
