This shows you the differences between two versions of the page.
createtcd [2014/02/15 02:57] jktuning |
createtcd [2019/02/13 14:27] (current) |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | ===== Open/Save/Import TCD ===== | + | ===== OPEN|SAVE|IMPORT TCD ===== |
+ | ==== OPEN TCD ==== | ||
To open a TCD go to File -> Open and choose the TCD you would like to open. | To open a TCD go to File -> Open and choose the TCD you would like to open. | ||
- | If you would like to Save the TCD you have open, simply go to File -> Save. | + | ==== SAVE TCD ==== |
+ | To Save the TCD you have open, simply go to File -> Save. | ||
+ | |||
+ | ==== SAVE TCD AS ==== | ||
+ | To Save the TCD to a new file, go to File -> Save As. | ||
- | If you would like to Save the TCD to a new file, go to File -> Save As. | + | ==== IMPORT FROM NEMU TO FILE ==== |
+ | To Import the tune data from the NEMU into a TCD file. | ||
+ | -Open a TCD from the startup calibration folder that matches your ECU type. | ||
+ | -Connect to the NEMU and when prompted that the calibration does not match, simply select IMPORT FROM NEMU. | ||
+ | -Go to File -> Save As and save the downloaded content to a new file |