createtcd
Differences
This shows you the differences between two versions of the page.
|
createtcd [2014/02/15 02:56] jktuning created |
createtcd [2019/02/13 14:27] (current) |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ===== Open/Save/Import TCD ===== | + | ===== OPEN|SAVE|IMPORT TCD ===== |
| + | ==== OPEN TCD ==== | ||
| To open a TCD go to File -> Open and choose the TCD you would like to open. | To open a TCD go to File -> Open and choose the TCD you would like to open. | ||
| + | |||
| + | ==== SAVE TCD ==== | ||
| + | To Save the TCD you have open, simply go to File -> Save. | ||
| + | |||
| + | ==== SAVE TCD AS ==== | ||
| + | To Save the TCD to a new file, go to File -> Save As. | ||
| + | |||
| + | ==== IMPORT FROM NEMU TO FILE ==== | ||
| + | To Import the tune data from the NEMU into a TCD file. | ||
| + | -Open a TCD from the startup calibration folder that matches your ECU type. | ||
| + | -Connect to the NEMU and when prompted that the calibration does not match, simply select IMPORT FROM NEMU. | ||
| + | -Go to File -> Save As and save the downloaded content to a new file | ||
createtcd.1392432981.txt.gz · Last modified: 2019/02/13 14:26 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution 3.0 Unported
